SOUTHWEST FLORIDA’S PREMIER Fiberglass Pool & Spa INSTALLER

(941) 626-7393

[email protected]

Port Charlotte, FL and surrounding areas

LEARN MORE

Call Us
(941) 626-7393

Email Us
[email protected]

There are many benefits to buying an in-ground fiberglass swimming pool.

  • QUICK AS A SPLASH
    Your fiberglass swimming pool can be installed in as little as 2 weeks, of course pending weather, permits, inspections, etc. In comparison, a concrete pool may take as long as 3-5 months to complete. When you purchase a fiberglass swimming pool, the shell arrives on-site pre-formed, complete and ready to go into the ground.
  • THE BIG FINISH
    Beautiful SHIMMER, with a finished surface, called gel coat. The “gelcoat” is applied during the manufacturing process.
  • MAINTENANCE FREE
    Under normal conditions, the “gelcoat” finish never needs painting. It’s smooth inert surface cleans easily, resists stains and requires less maintenance over time.
  • SMOOTH AND SAFE
    Unlike other materials, our fiberglass swimming pools are non-abrasive. There are no sharp, dangerous edges, so there will be no scraping skin off fingers and toes. We incorporate anti-skid surfaces on all stairs and the pool floor to help keep your family safe.
  • ADD A LITTLE SALT
    Salt water pools are becoming increasingly popular for their healthy, natural feel. Salt water is totally compatible with fiberglass pools as long as you properly maintain your water chemistry.
  • YOU GET WHAT YOU SEE
    The pool style you select with your dealer is exactly what you get at home. No hit or miss guesswork. All Barrier Reef pools are manufactured in climate-controlled factories and held to the highest standards.
  • FLEXING ITS MUSCLE
    Our fully molded one piece 100% fiberglass swimming pool shells flex without cracking to accommodate earth movement unlike concrete and other pre-formed pools that contain mineral fillers which have been known to reduce flexibility.
  • LOOKING GOOD
    Fiberglass swimming pools come in a fantastic range of SHIMMER colors, shapes, sizes and designs.
  • HAVE FUN
    That’s all that’s left to do.

Difference between fiberglass
and traditional concrete or liner pools:

Features

  • Warranty
  • Installation
  • Product Quality
  • Design Quality
  • Durability
  • Interior Finish
  • Swims out, steps, benches, sundecks
  • Water Chemistry

San Juan Fiberglass Pools Benefits

  • 25 year non-prorated structural warranty
  • Within days
  • Manufactured in a controlled environment
  • 100+ models to choose from
  • Flexes under Pressure
  • Smooth, skin friendly
  • One-piece molded in
  • No harsh chemicals needed

vs. Gunite difference

  • One year by Contractor
  • 8+ weeks
  • Quality dependent on job-site conditions
  • Unlimited
  • Rigid, cracks with movement
  • Very rough
  • Only at an additional cost
  • Requires muriatic acid

Features

  • Pro-rated only on seam separation
  • 5 weeks
  • Quality dependent on on work force
  • Limited to standard shapes
  • Punctures and tears
  • Slippery, rough seams
  • Drop in type or ladder
  • No harsh chemicals needed

Eco Friendly

Lower chemical use means less impact to the environment. Little or no chemical runoff to harm water table and up to 75% less packing material going to landfills. Because of the smooth fiberglass finishes, algaes and mildew will not adhere, this enables shorter pump run times, less than half of a gunite pool, resulting in much less electrical consumption and lower monthly bills. Self insulated fiberglass construction increases the pools ability to maintain water temperature. This also shortens heater run times reducing the energy needed to keep your pool warm.

Quality that last!

Features

  • Gel Coat
  • Vinyl Ester Resin
  • Hand Laid
  • Woven Roving
  • Sprayed Chop
  • Resin
  • Coring & Fillers
  • Interior ledges

Sunny Florida Pools Benefits

  • 32-Mil total
  • Used throughout entire pool
  • Consistent level of thickness overlapping seams creates a super structure 15 layers thick
  • Provides significant strength to entire pool
  • Not used on San Juan Pools
  • Higher glass to resin ratio
  • Not used on San Juan Pools
  • Not needed on hand laid pools

Chopped / Composite Fiberglass Pools Difference

  • 15-Mil typical
  • Typically used on first layer only
  • No consistency in thicknes Sprayed on
  • Not used on chopped pools
  • Lowest cost construction method
  • Lower glass to resin ratio
  • Makes walls brittle Inhibit flexural strength
  • Used to stiffen pool walls, makes area smaller

San Juan high-strength hand-laid fiberglass pools don’t require ledges! Cheap sprayed on fiber glass pools are built with ledges

Cheap sprayed on fiberglass pools are built with ledges around them. They are marketed as “safety ledges”. These ledges are added to compensate for the weakness of chopped fiberglass pools. Rather than offer safety, they can actually increase the risk of injury. They also make the bottom of the pool significantly narrower and reduce the play area.

Additional Benefits
of Fiberglass:

COLD RESISTANT

Even under the extreme cold temperature by using Liquid Nitrogen (-321degrees fahrenheit) a San Juan Fiberglass pool doesn’t fail. As you can see in the photos, vinyl liners and concrete crack and break, San Juan does not. This proves that San Juan Pools hold up in extreme cold temperatures.

BULLET RESISTANT

Bullet-Proof San Juan Fiberglass Pools! That’s right bullet-proof ! A 9mm, 380, 45 and 44 magnum did not penetrate the San Juan Pool. This demonstrates the incredible strength of our hand-laid fiberglass pools. Chopped fiberglass pools offer no resistance as seen in the bottom photo.

ACID RESISTANT

Muriatic Acid can’t harm a San Juan Fiberglass Pool! Acid is a major component in your water chemistry and when not maintained properly it can hurt the finish. This test shows how swimming pool acid can destroy a concrete pool. Pouring Muriatic Acid directly on a concrete pool starts destroying it immediately, however, it has no effect on San Juan pools.

HEAT RESISTANT

Using a high temperature acetylene torch (5,700 degrees fahrenheit) with its ability to cut through steel still can’t hurt a San Juan Pool as you can see in these photos. This proves that San Juan Pools hold up in extreme hot temperatures.

Experience the Fiberglass Pools
& Spas Frenzy!

Sunny Florida Pools brings you quality fiberglass pools with an unmatched focus on bringing your backyard vision to life.

Link

Connect With Us

Facebook Instagram

Areas We Serve

We are the premier fiberglass pool installer in Port Charlotte, Punta Gorda, Englewood, Deep Creek, Arcadia, Cape Coral, Venice, Sarasota and all of Southwest Florida

Contact Us

(941) 626-7393

[email protected]

PO Box 380175
Port Charlotte, FL 33938

Copyright ©2024 Sunny Florida Pools , Inc. All Rights Reserved.